1.5in Standard Closed Column Extractor 45-270g

$349.95$597.95

DISCLAIMER: This unit (1.5in Standard Closed Column Extractor 45-270g) is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. DO NOT USE INDOORS

*Note:  Column capacity may vary depending on the biomass density, moisture content and column packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, heavily dried, and/or lightly packed material can reduce capacity by 50%.
For best results, we recommend to tightly pack coarse ground material.

SKU: N/A Categories: , , ,

Description

Say goodbye to open blasting. For an optimal and safe extraction process, our Standard Closed Column Extractor allows for maximum solvent pressure, allowing the user to build up solvent pressure to their desire. Simply close the valve, pull a vacuum, and fill the extractor.  Parts come neatly packaged and ready to assemble.

Key Features and Description:
  • Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
  • Compound Gauge with (-30)-160 PSI readout
  • This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant
  • The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included
  • Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended
  • This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.
Spool Sizes Specifications:
  • 1.5″ x 6″ = 30G – 45G
  • 1.5″ x 12″ = 60G – 90G
  • 1.5″ x 18″ = 90g – 135G
  • 1.5″ x 24″ = 120g – 180G
  • 1.5″ x 36″ = 180G – 270G
Explorer Kit Automatically Includes:
  • 8″ x 8″ Platinum Cured Silicone Non-Stick Pad
  • 1.5″ Tri-Clamp 304 Stainless Steel Material Tube
  • 304 Stainless Steel Flare End Caps with Heavy Duty Stainless Steel Miniature Ball Valves
  • (1) 1.5″ Standard Pressure Tri-Clamp Clamps
  • 1.5″ Tri-Clamp Quadpod
  • (1) Buna-N Tri-Clamp Gaskets
  • Buna-N 100 Mesh (150 Micron) Gasket
Professional Kit Adds the following:
  • Compound Gauge
  • Sight Glass
  • Shower Head

Additional information

Processing Application

Extraction

Processing Capacity

135 Gram, 180 Gram, 270 Gram, 45 Gram, 90 Gram

Processing Configuration

Explorer, Professional

Reviews

There are no reviews yet.

Be the first to review “1.5in Standard Closed Column Extractor 45-270g”

You may also like…