Anden Dehumidifier

Description

The Anden Model Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit. Dehumidification occurs until the set point is reached, then shuts off until periodic sampling determines a need for operation.

Features
Control (3): Front mount only
Air discharge orientation: End of cabinet only

Inlet air operating conditions during: -Dehumidification: 50°F – 104°F, 40°F dew point min. -Ventilation: 40°F – 140°F, 0% – 99%RH (non-condensing)
Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60%RH inlet air at 0.0 ESP.
Height does not include adjustable feet. The width excludes the filter doors and length excludes the duct collars.
Built-in automatic control capable to be set up for dehumidification and ventilation or zoning.
Adapters for threaded connection for plastic hose included.